SPECIFICATIONS

Wheelbase: Bottom Plate

Use: Vehicles & Remote Control Toys

Upgrade Parts/Accessories: Frame

Tool Supplies: Battery

Technical parameters: Value 2

Size: 240mm 5inch

Remote Control Peripherals/Devices: Remote Controller

Recommend Age: 12+y

RC Parts & Accs: Antennas

Quantity: 1 pcs

Origin: Mainland China

Model Number: Nazgul5 V2 Analog

Material: Carbon Fiber

Four-wheel Drive Attributes: Assemblage

For Vehicle Type: Airplanes

Certification: CE

Brand Name: IFLIGHT

Description

• Nazgul5V2is a 5″ size BNF (Bind-and-Fly) quadcopter.it isupdated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don’t worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!

Tips:

• VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

HIGHLIGHTS:

• 5mm arm design for more durability

• Easy-Swap arms

• LED illuminated Logo

• XING-E Pro 2207 motors and NAZGUL F5 props

• 5″ version also fits 5.1″ style propellers

• Popular True-X configuration

• TPU crash-guards

• Fits both 30.5x and 20x stacks

XL5 V5 frame specs:

• BLITZ E45S 4-IN-1 45A 2-6S ESC

• BLITZ F7 Flight Controller V1.1

• XING-E Pro 2207FPV Motor6S 1800kv )

• Wheelbase: 240mm*240mm

• Body size: 170*170mm

• Propeller size: 5 inch /5.1 inch

• FC pattern: 30.5*30.5/20*20 mm

• FPV cam spacing: 19mm

• Weight: 393.4g (without battery)

PRE-TUNED & PRE-SETUP:

• Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

• To restore lost tunes or updates, please check our linked article on“Firmware/Factory Dumps”

• Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!

• Please check our linked article on“How to disable Angle-Mode, activate Acro-Mode”

Nazgul5 V2 Quad BNF Included Components and Parts

• Prebuilt and tested Quadcopter

• 1x XL5 V5 Frame

• 1xRaceCam R1 Mini 1200TVL 2.1mm 19*19

• 1xAlbatross RHCPSMA5.8g antenna

• 2sets x Nazgul 5 inch 3-blades (Set of 4 – Color may vary)

• 1x 20*200mmMicrofiber PU Leather Battery Strap (Color May Vary)

• 1×20*250mmMicrofiber PU Leather Battery Strap (Color May Vary)

Changelog:

• May 31st,2021:Before SucceX-E F4 Stackchanged toSucceX-E F7 Stack.

• June,2021:Before Caddx Ratel camera changed toRaceCam R1 Mini camera.

• February 2022:Before SucceX-E F7 flight controller changed to BLITZ F7 flight controller.

• April 2022:Before SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC changed to BLITZ E45S 4-in1 ESC

• October 2022:BeforeSucceX Force 5.8g 800mW VTX changed to BLITZ 1.6W VTX

FC //BLITZ F7 Flight ControllerV1.1

• MCU:STM32 F722

• Gyro: BMI270

• Barometer: DPS310

• OSD Chip: AT7456E

• Flash: 32MB (Blackbox flash)

• UARTS: 6

• Motor outputs: 4x (SH1.0 connector)

• I2C serial: SDA / SLA pads

• Smartaudio / IRC Tramp VTX protocol supported

• LED controller: Yes

• Beeper pad: Yes

• Firmware target: IFRC-IFLIGHT_BLITZ_F722

• Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter

• Dimensions: 36.5*35 mm

• Weight: 7.8g

ESC // BLITZ E45S 4-IN-1 45A 2-6S ESC

• Supports: DShot150/300/600/MultiShot/ OneShot etc.

• Mounting Holes: 30.5*30.5mm/4mm

• Supports 2-6S lipo input

• Telemetry Output: NO

• Target: QH-40 16.7

• Current sensor: Yes

• Constant: 45 Amps

• Current rate: 200

• Burst: 55 Amps

• Weight: 14.7g

• MCU: BB21

• BEC: NO

VTX// BLITZ 1.6W VTX Adjustable

• Stable output power

• 4 Power levels up to 1600mW;

• 40 Channels (including Raceband)

• Fast frequency lock, no startup interference with other pilots

• Built-in output power self-check functionality

• VTX telemetry with IRC Tramp protocol

Specs:

• Input voltage: 7V36V