SPECIFICATIONS

Wheelbase: Screws

Use: Vehicles & Remote Control Toys

Upgrade Parts/Accessories: Adapter

Tool Supplies: Assembly Category

Size: 1 inch

Remote Control Peripherals/Devices: Receivers

Recommend Age: 12+y

RC Parts & Accs: Board

Quantity: 1 pcs

Origin: Mainland China

Model Number: GEPRC ELRS Nano Receiver

Material: Metal

Four-wheel Drive Attributes: Assemblage

For Vehicle Type: Helicopters

Brand Name: GEPRC

Summary:

GEPRC ELRS Nano receiver is a new generation remote control system developed based on the ExpressLRS open source project. ExpressLRS sets new standartds for long-range connection, low latency and maximum refresh rate of 500hz.

GEPRC ELRS Nano receivers are available in 915/868MHz and 2.4GHz versions with maximum refresh rate of 500Hz and can be used with GEPRC ELRS-series products or other ELRS-compatible devices.

Specifications:

Size:17mm*11mm

Weight:0.6g(receiver only)

Frequency band: 915MHz FCC/868MHzEU/2.4GHz ISM

Input voltage:5V

Antenna connector:ipex1

Features:

1. Small size

2. 0.6g weight

3. WIFI Upgrade firmware

4. ELRS open source project, remote control

5.The operation is simple

Package Included:

1 x Receiver

1 x T antenna

2 x Heat shrink tube

4 x Silicone cable(black, red, yellow, green)

1 x Pin (4pin)

1 x Instruction manual

LEDStatus indication

LED Status Indicators: Solid ON – Indicates a connection has been established. Flashing Slowly – No TX signal detected. Flashing Quickly – WIFI mode enabled. Double Flash Quickly – Binding in progress.

Connection diagram of ELRS NANO receiver and flight controllerOpen BETaflight, go to the port interface,. According to the welding situation, turn on the (serial digital receiver) switch of the corresponding port (take port 2 as an example), then save and restartSet the receiver mode to (serial digital receiver) and change the serial digital receiver protocol to (CRSF)

To use the RX_Serial feature, configure a serial port via the ‘Ports’ tab and select a Serial Receiver Provider.