• Input Power Voltage: 6V-30VDC
• Power Maximum output current: 240W
• Maximum continuous output current: 5A

Description:

This CCM5D Digital PWM DC Motor Speed Controller With Display is used to control the speed of a DC motor through PWM. This controller comes with a 3 digit 7 segment Red color display, which displays the duty cycle of the PWM from range 0 to 100. The adjustable speed range is 0% -100%. Suitable for DC motor ( or DC load) within 5A, maximum current 8A

Specification:

• Input Power Voltage: 6V-30VDC
• Power Maximum output current: 240W
• Maximum continuous output current: 5A; (Crest value current 8A),
• LED displays service ratio 0-100%
• PWM Frequency: 16kHz
• Adjustable duty cycle: 0% -100%

Features:

• The CCM5D DC Motor speed regulator controls the speed of a DC motor by adjusting the Modulated Pulse Width (PWM).
• Large 0.56-inch 3-digit LED display numbers allow viewing in the most adverse conditions.
• The display range of the 3-digit LED display is “000-100”. (For example, shown as “066 ” as picture 1, it means the PWM output duty cycle is 66%.)
• The adjustable speed range is 0% -100%. Suitable for DC motor ( or DC load) within 5A, maximum current 8A
• Incorporates a push button Push closed then push open.

Instructions:

Before try wiring the controller, make sure the power is off.

• Connection cables refer to wiring diagrams.
• Turn on the power and adjust the potentiometer.
• The LED display shows the PWM output duty cycle.
• Push the key, the controller closed, push again, the controller opens.

Package Included:

1 x DC 6V 12V 24V 5A PWM DC Motor Speed Controller CCM5D Digital Display LED Motor Controller